💻
Void Permanent Spoofer
  • Welcome
    • Welcome To Void
  • FORTNITE/RUST/APEX/EAC/BE
    • Windows Reinstall
      • Normal Reinstallation
      • Raid0 Reinstallation
        • ⭕AMD
    • Void Download
    • New Account
    • Extra Safety Steps
    • FORTNITE CUPS
    • HP/ASUS SPOOFING
    • THE END !
  • ❤️VALORANT/LOL/VGK
    • 1️⃣Windows Reinstall
      • ⚡Normal Reinstallation
      • ⚡Raid0 Reinstallation
    • 2️⃣BIOS CONFIG
    • 3️⃣TPM / SB CONFIG
    • 4️⃣Void Download
    • 5️⃣New Account
    • 👾HP SPOOFING
    • 6️⃣Extra Safety Steps
    • 7️⃣HVCI/TPM/SB
    • 🔚THE END !
  • 💙COD/WZ2/MW3
    • 1️⃣Windows Reinstall
      • ⚡Raid0 Reinstallation
    • 2️⃣BIOS CONFIG
    • 4️⃣Void Download
    • 5️⃣New Account
    • 🔚THE END !
  • TROUBLESHOOTING
    • LOADER CRASHING
    • SERIALS NOT CHANGING
    • ETC
Powered by GitBook
On this page
  • PERMANENT ASUS SPOOFING
  • PERMANENT HP SPOOFING
  1. FORTNITE/RUST/APEX/EAC/BE

HP/ASUS SPOOFING

Instructions on HP/ASUS spoofing:

PreviousFORTNITE CUPSNextTHE END !

Last updated 11 days ago

PERMANENT ASUS SPOOFING

  • On Asus and FORTNITE/APEX, you can use PERM ASUS function, by clicking on the button after you're done with all previous steps.

  • Check serials after restarting PC, and they should be changed permanently.

PERMANENT HP SPOOFING

Tutorial:

  1. Plug in a USB to ur computer (Must be 32GB or less, not more)

  2. Right-click on the USB drive in Windows Explorer and click on "Format".

  3. Change File System to 'FAT32', then click on start and wait.

  4. DOWNLOAD HP LOADER

  5. Select USB in EFI Loader, and run 'HP Unlock'! No Files may be shown inside ur USB (pls dont panic man just trust the process)

  6. After success, Hold SHIFT, click Restart and keep holding SHIFT!

  1. Select Use a device and select the USB (Known as "Flash Drive")

  1. Just WAIT now, and u will see something that looks like this picture below ( forgot to clean camera sorry )

  1. Now, after this WAIT, it will ask "Manufacturer mode to unlock mode": CLICK YES!

10. Now it will boot into Windows again, and the USB can be removed. Incase Windows does not boot, please remove the USB, and wait.

  1. Reopen loader, Click on HP PERM SPOOF

4- Wait for spoofing process then restart PC

  • Check all serials after restarting, they should be permanently changed.

  • Make sure there is no BIOS Password enabled. This will cause the serials not to change.

: